Description
Q.PEAK DUO BLK ML-G10.C+ | 132 Half-Cut Mono PERC Cells
Reliable Solar Power with a Clean Rooftop Appearance
The Qcells Q.PEAK DUO BLK ML-G10.C+ delivers 410W of rated output with a black frame and black backsheet for a uniform rooftop appearance. Its 132 monocrystalline half-cells use Q.ANTUM DUO Z technology and a zero-gap layout to make efficient use of the module surface.
With a minimum module efficiency of 20.9%, this panel is a practical choice for residential rooftops and other compatible solar installations. Each module measures approximately 74.0 × 41.1 inches and weighs 48.5 pounds.
Product Highlights
- 410W rated output under standard test conditions
- 20.9% minimum module efficiency for the 410W model
- Includes U.S.-manufactured junction box, encapsulant, and backsheet
- Q.ANTUM DUO Z technology with zero-gap cell layout
- 132 monocrystalline Mono PERC half-cells
- Black anodized aluminum frame and black backsheet
- 3.2mm front glass with anti-reflection technology
- Anti-LeTID, Anti-PID, and Hot-Spot Protect technology
- 0 to +5W power tolerance
- Stäubli MC4 connectors
- 25-year product warranty
- 25-year linear performance warranty
Includes U.S.-Manufactured Components
Perfect For
- Residential rooftop solar installations
- Homeowners looking for an all-black panel appearance
- Projects requiring documented domestic components
- Ground-mounted systems with compatible racking
- Grid-connected solar systems with properly matched equipment
- Off-grid and battery-based systems with compatible power electronics
Q.ANTUM DUO Z Technology
Q.ANTUM DUO Z combines Qcells’ monocrystalline half-cell technology with a zero-gap cell layout. Reducing the space between cells increases the active cell area within the module.
The panel also incorporates Anti-LeTID, Anti-PID, and Hot-Spot Protect technologies to support long-term reliability. Actual energy production depends on sunlight, temperature, shading, orientation, and system design.
Built for Outdoor Installations
The module combines 3.2mm thermally pre-stressed front glass with a black anodized aluminum frame and composite-film back cover. Its permitted continuous operating temperature range is -40°F to 185°F.
The datasheet distinguishes between design loads and test loads. Maximum listed design loads are 3,600Pa push and 2,660Pa pull, while maximum test loads are 5,400Pa push and 4,000Pa pull. Approved mounting requirements apply.
25-Year Warranty Coverage
Qcells provides a 25-year product warranty and a separate 25-year linear performance warranty, subject to the applicable manufacturer terms.
The published performance warranty specifies at least 98% of nominal power during the first year, followed by no more than 0.5% annual degradation. Guaranteed output is at least 93.5% at year 10 and 86% at year 25.
Product Specifications
| Specification | Details |
|---|---|
| Manufacturer | Qcells |
| Manufacturer Part Number | Q.PEAK DUO BLK ML-G10.C+ 410 |
| Rated Power | 410W at STC |
| Minimum Module Efficiency | 20.9% |
| Cell Technology | Monocrystalline Mono PERC, Q.ANTUM |
| Cell Configuration | 132 half-cells, 6 × 22 layout |
| Technology | Q.ANTUM DUO Z, zero-gap cell layout |
| Power Tolerance | 0 to +5W |
| Maximum Power Voltage (Vmp, STC) | 37.64V |
| Maximum Power Current (Imp, STC) | 10.89A |
| Open-Circuit Voltage (Voc, STC) | 45.37V |
| Short-Circuit Current (Isc, STC) | 11.20A |
| Power at NMOT | 307.6W |
| Maximum Power Voltage at NMOT | 35.68V |
| Maximum Power Current at NMOT | 8.62A |
| Open-Circuit Voltage at NMOT | 42.79V |
| Short-Circuit Current at NMOT | 9.03A |
| Maximum System Voltage | 1,000V DC, IEC / UL |
| Maximum Series Fuse Rating | 20A |
| Dimensions (L × W × H) | 1879 × 1045 × 32mm / 74.0 × 41.1 × 1.26 in |
| Weight | 22.0kg / 48.5 lb |
| Front Cover | 3.2mm thermally pre-stressed glass with anti-reflection technology |
| Back Cover | Black composite-film backsheet |
| Frame | Black anodized aluminum |
| Junction Box | IP67, with bypass diodes |
| Cable Cross-Section | 4mm² |
| Cable Lengths | Positive and negative leads each at least 1830mm / 72.04 in |
| Connectors | Stäubli MC4, IP68 |
| Permitted Module Temperature | -40°C to 85°C / -40°F to 185°F |
| Nominal Module Operating Temperature | 43 ±3°C |
| Power Temperature Coefficient | -0.34%/°C |
| Voc Temperature Coefficient | -0.27%/°C |
| Isc Temperature Coefficient | +0.04%/°C |
| Maximum Design Load, Push / Pull | 3,600Pa / 2,660Pa, subject to approved mounting configuration |
| Maximum Test Load, Push / Pull | 5,400Pa / 4,000Pa, subject to approved mounting configuration |
| Fire Rating | Type 2, based on ANSI / UL 61730 |
| PV Module Classification | Class II |
| Listed Standards | UL 61730-1, UL 61730-2, IEC 61215:2016, IEC 61730:2016 |
| Product Warranty | 25 years, subject to manufacturer terms |
| Linear Performance Warranty | 25 years, subject to manufacturer terms |
| Published Year-25 Output Guarantee | At least 86% of nominal power, subject to warranty terms |
| Manufacturer Packing Quantity | 32 panels per pallet; listing purchase quantity applies |
| Previous Supplier SKU | HQC-410MLQPG10-BK |
Mounting and Equipment Compatibility
Select racking that accommodates the module’s dimensions, 32mm frame, approved clamp locations, and site-specific structural loads.
String inverters, microinverters, optimizers, and charge controllers must support the panel’s electrical characteristics. Confirm cold-weather string voltage, MPPT operating range, current limits, and the permitted number of connected modules.
This listing is for the solar panel. Racking, inverters, batteries, extension cables, and other installation materials are sold separately. Manufacturer pallet quantity describes packing configuration and does not change the quantity selected when ordering.
Frequently Asked Questions
Does this specific panel include domestic content?
Yes. This product includes U.S.-manufactured junction box, encapsulant, and backsheet components.
Does domestic content mean the entire panel is made in the USA?
The domestic-content statement identifies the U.S.-manufactured junction box, encapsulant, and backsheet. It does not establish that every component or the complete module is manufactured in the United States.
Does purchasing this panel guarantee a domestic-content incentive?
No. Project eligibility depends on the complete installation and applicable requirements. Confirm the manufacturer documentation and review your project with a qualified tax professional.
What is the efficiency of the 410W model?
The datasheet lists a minimum module efficiency of 20.9% for the 410W model. The series maximum of 21.1% applies to the 415W model.
Is this an all-black solar panel?
Yes. This product features a black frame and black backsheet for an all-black rooftop appearance.
Is this panel bifacial or dual glass?
No. This model uses front glass and a composite-film backsheet. It is not a bifacial or dual-glass module.
What does Q.ANTUM DUO Z mean?
Q.ANTUM DUO Z combines Qcells’ half-cell technology with a zero-gap cell layout to increase the active cell area within the module.
Can I use this panel with a microinverter?
Potentially, depending on the microinverter. Compare its input voltage range, maximum voltage, operating current, and short-circuit current limits with the panel specifications, including temperature adjustments.
Can this panel be used in an off-grid system?
Yes, with a compatible charge controller or inverter and an appropriately designed system. Confirm the permitted string configuration and equipment limits before installation.
What warranty comes with the panel?
Qcells provides a 25-year product warranty and a 25-year linear performance warranty. The published performance guarantee specifies at least 86% of nominal power at year 25, subject to manufacturer terms.
Is this listing automatically for a full pallet?
No. The manufacturer packing quantity is 32 panels per pallet. Your purchase quantity is determined by the product options and quantity selected when ordering.
Are mounting equipment and inverters included?
No. Racking, mounting hardware, inverters, batteries, and additional installation materials are sold separately.
Reviews
There are no reviews yet.